G1 Glass Mount Antenna

HiTV G1 Glass Mount Antenna requires no holes or special tools and can be quickly & easily installed on a windscreen.

The antenna couples through the glass and its high positioning gives it an almost omni-directional radiating pattern, with a high performance similar to a conventionally mounted roof-top antenna.

The antenna whip can be easily removed for the car wash. To transfer the antenna assembly, both the coupling box and the mounting foot can be removed and the glass cleaned to leave it in its original state.

Specification

  • Type
  • Material
  • Length
  • Connector
  • Cable Length
  • Glass Mount
  • Whip Antenna
  • 20 cm
  • F-Type
  • 3 m

S1 Shark Fin Antenna

An antenna with a sleek shape to be mounted on rooftop.

Suitable location to mount the antenna is on top of the car or on any part of the car roof area. It is a magnetic based antenna and can be moved if desired.

Specification

  • Type
  • Material
  • Length
  • Connector
  • Cable Length
  • External
  • Magnetic base rear roof antenna
  • 14 cm
  • F-Type
  • 2m (thin) + 5m (thick)

B1 Versatile External Bumper Bar Antenna

Suitability: VIVA, Pure III

Exciting new antenna with the same size as its predecessor, but with a newly added ACTIVE booster. Excellent reception.

Installation Procedure

  • Suitable locations to mount the antenna are on the windshield, behind the rear vision mirror or near the passenger side in which a minimum 150 mm clearance from the edge should be allowed.
  • Peel back the adhesive backing papers from the transparent antenna.
  • Gently attach the adhesive tape to the glass to allow for minor alignment and then attach the antenna to the glass.
  • Finally, rub firmly with the back of fingernail to achieve transparent appearance. LED should be lighted when connected to the television tuner to indicate power supply.

Specification

  • Type
  • Material
  • Length
  • Connector
  • Cable Length
  • External
  • Bumper Bar Antennas
  • 68 cm
  • F-Type
  • 5 m

C2 Internal Transparent Antenna

Suitability: VIVA, Pure III

A newly designed 68cm bumper bar antenna, with excellent reception in a vertical slim line design, which allows immersion into the bumper bar. Very easy installation can be simply stuck under the bumper bar or being hidden inside the bumper bar for better reception (requires further inspection on thickness of the tint, and the method of keeping cables hidden). Perfectly supports specific external antennas for big size vehicles.

HiTV's latest innovation on mobile DTV antenna is the B1, Multi-usage horizontal digital antenna With its patterned dipole design, the B1 can even capture the signals when it's installed under the bumper. The slim and horizontal shape gives users alternative to install B1 internally without signal interference from demisters, on the back windscreen. B1 is water proof and that makes B1 very durable and reliable suited for toughest Australian weather.

Specification

  • Type
  • Material
  • Length
  • Connector
  • Cable Length
  • Internal
  • Transparent Antennas
  • 40 cm
  • F-Type
  • 5 m

R3 Bracket-Based External Rear Antenna

Suitability: VIVA, Pure III

A versatile antenna with the same whip length as R1, but an extra bracket to hold semi-permanently on boot top. One end can be mounted to Z bracket, while the other end to bumper bar, in order to be able to store inside bumper bar. As well as on bull bar.

Installation Procedure

  • Suitable location to mount the antenna are on the booth of the car or on the bonnet as long as it does not affect any part of the car as it is a permanent fixed bracket based antenna.
  • The antenna should be mounted on the external side of the car and not internally to function best.
  • Make sure that the antenna shaft is fastened down tightly to its matching bracket base. (Note; the shaft can be rotated and removed.)
  • Align the wires to the television tuner and place the antenna with its bracket base on any preferred area. (The bracket should be screwed down stable to the desired place.)
  • As the base is locked down tight, the shaft can still be rotated to be kept when not in use. This prevents theft, damage or defacement from occurring.
  • Suitable for trunk cover. Bracker Base hold stably on edge.

Specification

  • Type
  • Material
  • Length
  • Connector
  • Cable Length
  • Bracket base rod antenna / Bracket
  • Transparent Antennas
  • 40 cm
  • F-Type
  • 5 m

R4 Built-In Car Rooftop External Antenn

Suitability: VIVA, Pure III

A versatile antenna with the same whip length as R1, but an extra bracket to hold semi-permanently on boot top. One end can be mounted to Z bracket, while the other end to bumper bar, in order to be able to store inside bumper bar. As well as on bull bar.

Installation Procedure

  • Suitable location to mount the antenna is on top of the car or on any part of the car roof area. It is a permanent fixed based antenna and is ideally design to replace existing car aerials.
  • The antenna should be mounted on the external side of the car and not internally to function best.
  • Make sure that the antenna shaft is fastened down tightly to its matching roof top base. (Note; the shaft can be rotated and removed.)
  • Align the wires to the television tuner. (The roof top base should be screwed down stable to the desired place.)
  • As the base is locked down tight, the shaft can still be rotated to be kept when not in use. This prevents theft, damage or defacement from occurring.

Specification

  • Type
  • Material
  • Length
  • Connector
  • Cable Length
  • Bracket base rod antenna / Bracket
  • Transparent Antennas
  • 40 cm
  • F-Type
  • 5 m

R7CX External Rod Antenna

Specification

  • Type
  • Material
  • Length
  • Connector
  • Cable Length
  • External
  • Material Fibre-glass rod antenna
  • 70 cm
  • F-Type
  • 5 m

This is a broadband antenna with linear-loaded sections to cover the VHF & UHF digital TV channels.

This antenna has an in-line amplifier in the cable to boost the signal.

The antenna is factory tuned and requires no further adjustment, this antenna is packed with the standard mounting base attached to the cable one end and an F type connector

In-line amplifier gain:

VHF - 18-20dBi

UHF - 15-18dBi

Ideal for 4 wheel drive vehicle.

R7W External Rod Antenna

Specification

  • Type
  • Material
  • Length
  • Connector
  • Cable Length
  • External
  • Material Fibre-glass rod antenna
  • 70 cm
  • F-Type
  • 5 m

This is a broadband antenna with linear-loaded sections to cover the VHF & UHF digital TV channels.

The antenna is factory tuned and requires no further adjustment, this antenna is packed with the standard mounting base and cable and F type connector.

Ideal for 4 marine use.

HiTV authorised installer

Get your HiTV products installed by our authorised installers for 1 year extra warranty and the best 'Supply+Fit' price!

Find an installer near you

Questions?

Call us on (02) 9929 3837

Or visit our Support Centre for more information.